Table of Contents
Advertisement
Step 6:
Press OK to enter the option menu. Use ▲/▼to select the region of your
location for TV signal, and press OK to confirm. Then use▼to select Next and
press OK to continue the setting.
Step 7:
Select Scan and press OK. The AVerLife XVision HD will then start to scan Analog
TV channels (ATV) in your area. To cancel the scanning process, select Cancel.
After the process finished, a list of available channels will be shown. Press OK to
continue the setting.
Step 8:
Select Scan to repeat the searching process for Digital TV channels (DTV). Once
finished, press OK. After the process finished, a list of available channels will be
shown. Press OK to continue the setting.
Step 9:
Select Finish and press OK to exit the wizard and start watching live TV.
* If you would like to activate the initial configuration again, please go to Setting > TV Settings > Initial Setting Wizard.
* The system will automatically detect the status of your network. If no network connection is detected, please make sure your network is
properly set up and connected. You can also configure network connection setups later via System Setting (See p.19 for more details).
3.3 The Remote Control
The illustrations below show the deployment of the keys on the remote control.
Please refer to the descriptions on the right for more information on key func tion and operation.
1.
POWER
2.
ASPECT
3.
Numeric Keypad
4.
MUTE
5.
INFO
6.
SOURCE
7.
EJECT
8.
RECALL
ENG-7
Press to turn the unit on/into stand-by mode.
* Stand-by mode: power-saving sleep mode.
Press to switch between different aspect ratios
(normal/widescreen) in TV-watching mode.
Input numbers to directly go to a specific channel.
Press to mute /unmute.
Press to display the on-screen TV program /media
information.
Press to toggle among different signal sources (Analog TV,
Digital TV, external video source).
Press to safely remove the external storage device.
Press to return to the previously selected channel.
User's Manual
Advertisement
Table of Contents
