Running The Avertv 6 Application For The First Time; Scanning For Analog Programs - Avermedia AVerTV 6 User Manual

3.2 Running the AVerTV 6 Application for the First
Time
If this is your first time running the application, the Setup dialog box will appear to
prompt you to scan for channels. (For details, please refer to the section Scanning
Channels).

3.2.1 Scanning for Analog Programs

1. Select Analog TV (or Programs) on the left pane of the Setup dialog box.
Note:
Make sure that your Country/Region is correct.
2. First, select an available Avermedia device in the left pane.
3. From the Region/Country drop-down list, select your country or region.
4. Click Apply to save the settings.
5. On this page, choose the TV option to search only for air channels or select CATV to
scan for cable channels.
5
AVerTV 6