Installing The Cti Tapilink Pro And Wave Licenses - Avaya IP Office CTI Link Installation Manual

Printed Documentation

Installing the CTI TAPILink Pro and Wave Licenses

You do not need a license in order to use the TAPI driver, but the license provides the following
additional functionality:
• Third Party mode
• ACD Queue monitoring
•
lineDevSpecific function enabled.
These are described in Configuring the TAPI Driver.
In addition, to use the Wave functionality you need to install a Wave User's Licence for each Wave user.
To install the TAPI licenses, proceed as follows:
1. Run the IP Office Manager. This is installed from the IP Office Admin CD.
2. Load the configuration file for your IP Office.
3. Select License on the tree in the left hand window.
4. Right-click in the right hand window and select New.
5. Type in the 32 character license key.
6. The IP Office Manager will indicate the licenses function.
7. Send the configuration back to the IP Office and select Reboot.
8. Following the reboot, reload the configuration and check that the new license is shown as Valid.
Installation Manual
IP Office CTI Link 40DHB0002UKAB - Issue 11a (22nd September 2005)
Page 8