Upc-A/Ean-13 With Extended Coupon Code; Upc-A Number System 4 Addenda Required - Honeywell VOYAGER 1250G User Manual

UPC-A/EAN-13 with Extended Coupon Code

Use the following codes to enable or disable UPC-A and EAN-13 with Extended
Coupon Code. When left on the default setting (Off), the scanner treats Cou-
pon Codes and Extended Coupon Codes as single bar codes.
If you scan the Allow Concatenation code, when the scanner sees the coupon
code and the extended coupon code in a single scan, it transmits both as sepa-
rate symbologies. Otherwise, it transmits the first coupon code it reads.
If you scan the Require Concatenation code, the scanner must see and read
the coupon code and extended coupon code in a single read to transmit the
data. No data is output unless both codes are read.
Default = Off.
* Off
Require Concatenation

UPC-A Number System 4 Addenda Required

This setting programs the scanner to require a coupon code only on UPC-A
bar codes that begin with a "4." The following settings can be programmed:
Require Coupon Code: All UPC-A bar codes that begin with a "4" must
have a coupon code. The UPC-A bar code with the coupon code is then
transmitted as a single, concatenated bar code. If a coupon code is not
found within the
carded.
Don't Require Coupon Code: If you have selected Require Coupon
Code, and you want to disable this feature, scan Don't Require Coupon
Code. UPC-A bar codes are transmitted, depending on the setting you are
using for UPC-A/EAN-13 with Extended Coupon
6 - 38
Addenda Timeout
Allow Concatenation
period, the UPC-A bar code is dis-
Code.