<Default All Codabar Settings>
Codabar Start/Stop Characters
Start/Stop characters identify the leading and trailing ends of the bar code.
You may either transmit, or not transmit Start/Stop characters.
Default = Don't Transmit .
* Don't Transmit
Codabar Check Character
Codabar check characters are created using different "modulos." You can
program the scanner to read only Codabar bar codes with Modulo 16, Mod-
ulo 7 CD, or CLSI check characters. Default = No Check Character.
No Check Character indicates that the scanner reads and transmits bar
code data with or without a check character.
When Check Character is set to Validate and Transmit , the scanner will
only read Codabar bar codes printed with a check character, and will trans-
mit this character at the end of the scanned data.
6 - 3