Ncr Prefix/Suffix; Ncr Nof (Not-On-File) Error; Scanner To Bioptic Communication - Honeywell VOYAGER 1250G User Manual

NCR Prefix/Suffix

When set to Transmit, both the NCR prefix and suffix are transmitted with
bar codes. Usually, prefixes and suffixes are programmed using the Data
Editing selections (see
following commands override any other prefix/suffix settings. Default =
Don't Transmit.
Transmit

NCR NOF (Not-on-File) Error

A scanner receives an NOF (Not on File) command from the POS when-
ever it cannot cross-reference the bar code to a price parameter. When set
to On, the error tone sounds (set via
for an NOF, and disables the scanner while the cashier looks up the price
manually. When set to Off, no sound is emitted for an NOF. Default = Off.

Scanner to Bioptic Communication

The following settings are used to set up communication between Honeywell
scanners and bioptic scanners.
Note: The scanner's baud rate must be set to 38400 and the RS232 Timeout
must be set to 3000 in order to communicate with a bioptic scanner. See
RS232 Modifiers
further information.
Data Editing
On
on page 2-19, and
beginning on page 4-1), however, the
* Don't Transmit
Number of Beeps –
RS232 Timeout
Error, page 3-4)
* Off
on page 2-22 for
2 - 27