Trioptic Code; Gs1 Emulation - Honeywell VOYAGER 1250G User Manual

GS1 DataBar Expanded Message Length
Scan the bar codes below to change the message length. Refer to
Message Length Description
mum and Maximum lengths = 1-80. Minimum Default = 3, Maximum
Default = 80.
Minimum Message Length

Trioptic Code

Trioptic Code is used for labeling magnetic storage media.
On

GS1 Emulation

The scanner can automatically format the output from any GS1 data carrier to
emulate what would be encoded in an equivalent GS1-128 or GS1 DataBar
symbol. GS1 data carriers include UPC-A and UPC-E, EAN-13 and EAN-8,
ITF-14, GS1-128, and GS1-128 DataBar and GS1 Composites. (Any applica-
tion that accepts GS1 data can be simplified since it only needs to recognize
one data carrier type.)
If GS1-128 Emulation is scanned, all retail codes (U.P.C., UPC-E, EAN8,
EAN13) are expanded out to 16 digits. If the AIM ID is enabled, the value will be
the GS1-128 AIM ID, ]C1 (see
If GS1 DataBar Emulation is scanned, all retail codes (U.P.C., UPC-E, EAN8,
EAN13) are expanded out to 16 digits. If the AIM ID is enabled, the value will be
the GS1-DataBar AIM ID, ]e m (see
If GS1 Code Expansion Off is scanned, retail code expansion is disabled, and
UPC-E expansion is controlled by the
the AIM ID is enabled, the value will be the GS1-128 AIM ID, ]C1 (see
Symbology Chart
(page 6-2) for additional information. Mini-
Symbology Chart
on page A-1).
Maximum Message Length
on page A-1).
Symbology Chart
UPC-E0 Expand
* Off
on page A-1).
(page 6-41) setting. If
6 - 65