Search Commands - Honeywell VOYAGER 1250G User Manual

Move the cursor to the beginning
F7 Move the cursor to the first character in the input message. Syntax =
F7.
Move the cursor to the end
EA Move the cursor to the last character in the input message. Syntax =
EA.

Search Commands

Search forward for a character
F8 Search the input message forward for "xx" character from the current
cursor position, leaving the cursor pointing to the "xx" character.
Syntax = F8xx where xx stands for the search character's hex value for
its ASCII code.
Refer to the
for decimal, hex and character codes.
Search backward for a character
F9 Search the input message backward for "xx" character from the current
cursor position, leaving the cursor pointing to the "xx" character.
Syntax = F9xx where xx stands for the search character's hex value for
its ASCII code.
Refer to the
for decimal, hex and character codes.
Search forward for a string
B0 Search forward for "s" string from the current cursor position, leaving
cursor pointing to "s" string. Syntax = B0nnnnS where nnnn is the string
length (up to 9999), and S consists of the ASCII hex value of each
character in the match string. For example, B0000454657374 will
search forward for the first occurrence of the 4 character string "Test."
Refer to the
for decimal, hex and character codes.
Search backward for a string
B1 Search backward for "s" string from the current cursor position, leaving
cursor pointing to "s" string. Syntax = B1nnnnS where nnnn is the string
length (up to 9999), and S consists of the ASCII hex value of each
character in the match string. For example, B1000454657374 will
search backward for the first occurrence of the 4 character string "Test."
Refer to the
for decimal, hex and character codes.
5 - 6
ASCII Conversion Chart (Code Page 1252)
ASCII Conversion Chart (Code Page 1252)
ASCII Conversion Chart (Code Page 1252)
ASCII Conversion Chart (Code Page 1252)
on page A-4
on page A-4
on page A-4
on page A-4