Table of Contents
Advertisement
In the General component, you have to setup Extension, CallerID, Name, OutBound CallerID
parameters, and choose a dialplan for the phone. Here I set up user 6002, and select DialPlan1 for
the user.
I select Enable Voicemail for this User option, so the user has voicemail function.
In the Technology componet, you have to select the port in which the analog phone will be
plugged from the drop-down list of Analog Station. I select Enable Voicemail for this User
option, so the user have voicemail function.
In the Other Options component, I select Is Agent which will be listed in Call Queues as a
selectable member for call queue.
At last, please click on Update button, and click on Apply Changes button in up right corner of
the main page.
Attension: in the textbox of Extension, the value you set is limited to a range, you can adjust the
range in the following screen to meet your requirement. Please select the Options option from the
vertical menu on the left, then you can get the following screen:
www.atcom.cn
16
Advertisement
Table of Contents
