Table of Contents
Advertisement
can refer to the following screen:
Please select the VOIP option, then select the IAX2 option, I register the IAX2 user 6020 as the
following illustration:
After configuring, please click on the APPLY button.
Attention: here you must register IAX2 user instead of SIP user, because the user 6020 is not in
the same network segment as IP02. If you use SIP user, you can not get sound when the
communication is established.
Now you can call each other among 6020,6001 and 6005 directly.
4.5 How to Call through VoIP Trunk
4.5.1 Call from IP02 to IP08
In order to call from IP02 to IP08, I will create a SIP user in IP08 for the SIP trunk in IP02, create
www.atcom.cn
52
Advertisement
Table of Contents
Need help?
Do you have a question about the IPPBX IP02 and is the answer not in the manual?
Questions and answers