Press "Back" for back to previous web screen.
4.11 PoE Configuration
This function provides the Power over Ethernet configuration of the Switch. The available options are shown as below:
POE Ports:
Allow user to Enable/Disable POE function and set port power feeding priority. Please refer to section 4.11.1.
POE Port Status:
Allow user to check the port Power over Ethernet settings and the connected power usage. Please refer to section
4.11.2.
4.11.1 POE Ports
This function allows Enable/Disable POE function and set port power feeding priority. The screen in figure 4-38 appears.
After setup is complete, press "Apply" button for save the current configuration. The screen in figure 4-39 appears with
message "Operation completed successfully!"
Press "Back" for back to previous web screen.
Figure 4-37 IP Configuration save successfully screen
Figure 4-38 POE Configuration Screen
Figure 4-39 POE Ports Configuration save successfully Screen