Table of Contents
Advertisement
Ingress Priority
802.1p priority
After setup is complete, press "Esc" key to return to Actions menu and use the "Tab" key to choose the <Save> for saving
the current configuration. The screen in figure 3-29 appears with message "Operation completed successfully!"
3.2.9 Bandwidth Control
Press 7 on your keyboard or use the "Tab" key to move the highlight to the Bandwidth control and press "Enter" to access
the screen of Bandwidth control from the Main Menu screen (please see the figure 3-4). Table 3-9 shows the descriptions
of the Bandwidth control screen Objects. Use the "Tab" key to choose the <Edit>, and start to modify these settings. The
screen of Bandwidth control in figure 3-30 appears.
Object
Port
InRate
OutRate
After setup is complete, press "Esc" key to return to Actions menu and use the "Tab" key to choose the <Save> for saving
the current configuration. The screen in figure 3-31 appears with message "Operation completed successfully!"
Session Wall, Sniffer Pro or Netxray.
802.1p priority=7:0: allow assign high and low on each priority.
Table 3-8 Descriptions of the QoS Configuration Screen Objects
Figure 3-29 QoS Configuration save successfully screen
Figure 3-30 Bandwidth Control setting Screen
Description
Indicate port 1 to port 24
Allow user to input the value of packet rate sent from the connected port to this port.
You must enable the flow control feature of this port for the function to work normally.
The available value ranges from 1 to 99.
Allow user to input the value of packet rate sent from this port to the connected port.
The available value ranges from 1 to 99.
Table 3-9 Descriptions of the Switch Information screen Objects
Advertisement
Table of Contents
