Table of Contents
Advertisement
After setup is completed, press "Esc" key to return to Actions menu and use the "Tab" key to choose the <Save> for saving
the current configuration. The screen in figure 3-27 appears with message "Operation completed successfully!"
3.2.8 QoS Configuration
Press 6 on your keyboard or use the "Tab" key to move the highlight to the QoS Configuration and press "Enter" to access
the screen of QoS Configuration from the Main Menu screen (please see the figure 3-4). Table 3-8 shows the descriptions of
the QoS Configuration screen Objects.
The QoS Configuration provide Disable, QoS Priority, High: Low=3:1, High: Low= 5:1, High: Low=7:1 and High empty
then Low selection from QoS mode. Use the "Tab" key to choose the <Edit>, and start to modify these settings. Use the
"Tab" key to move the highlight to the selection and press the "Space Bar" key to toggle back and forth between the options.
The screen of QoS Configuration in figure 3-28 appears.
Object
QoS Mode
Static Port
Table 3-7 Descriptions of the Port Mirroring Configuration Screen Objects
Figure 3-27 Port Mirroring Configuration save successfully screen.
Figure 3-28 QoS Configuration screen
Description
The available options are shown as below:
High: Low=3:1: the packet output ration of high priority and low priority is 3 to 1.
High: Low=5:1: the packet output ration of high priority and low priority is 5 to 1.
High: Low=7:1: the packet output ration of high priority and low priority is 7 to 1.
High empty then Low: forward the packets with high priority first then packets with
low priority.
Disable QoS Priority: disable QoS priority function.
Allow seeing all monitor port traffic; you can connect Monitoring port to LAN Explorer,
Advertisement
Table of Contents
