Table of Contents
Advertisement
Object
VLAN Configuration
Return to Main Menu
3.2.6.1 Create a Port-Based VLAN Group
Choose "Port Based" from the VLAN mode of VLAN Configure. The screen in figure 3-9 appears with message "Press
SPACE to select and ENTER to set mode". Please press "Enter" to continue. The following screen in figure 3-10 appears
with message "Change mode will clear original VLAN setting! Continue? [Y / N] ". Please press "Y" then the following
screens in figure 3-11 & 3-12 appears.
Figure 3-8 VLAN Configure screen
Description
Allow user to disable/enable the Port-based VLAN function. The available options
are shown as below:
Disabled: disable VLAN function of the Switch.
Port Based: enable port-based VLAN function of the Switch. The available group
ID from 1 to 255.
Back to Main Menu screen.
Table 3-5 Descriptions of the Trunk Configuration screen Objects
Figure 3-9 Create a port-based VLAN Group screen
Figure 3-10 Create a port-based VLAN Group screen
Advertisement
Table of Contents
