Table of Contents
Advertisement
Flow Control
Packet Control
Switch Fabric
PoE Power Feeding
PoE Power Consumption
Switch Management
Port Configuration
Port Status
Trunk
VLAN
Port Mirroring
QoS
Bandwidth Control
PoE Configuration
PoE Status
Standard Conformance
Network Standards
Operation Temperature
Storage Temperature
Humidity
Regulation Compliance
Back pressure for half duplex, IEEE 802.3x for full-duplex
Runt & CRC filtering, Broadcast storm control
8.8Gbps
48VDC
260 watts; 800 BTU/hr max.
Port disable/enable. Auto-negotiation disable/enable. 10/100Mbps full and half duplex mode
selection. Flow control disable/enable
Display each port's disable/enable status, each port's link status, and speed duplex mode.
Flow control status.
7-trunk groups with up to 4-port per trunk
26 Port-based VLAN groups
1 Mirroring port to monitor several mirrored ports. The monitor modes are Disable, RX, TX,
TX& RX
Allow to assign low and high priority on each port
Allow to assign rate control on each port
PoE power supply enable/disable, power feeding priority
PoE power consumption, per port power injection status
IEEE 802.3 (Ethernet),
IEEE 802.3u (Fast Ethernet)
IEEE 802.3z(Gigabit Ethernet)
IEEE 802.3ab (Gigabit Ethernet)
IEEE802.3x (Flow control)
IEEE 802.1p QoS
IEEE802.3af Power over Ethernet
0~50 degree C
-40~70 degree C
5% to 95% (Non-condensing)
FCC, CE Class A
130 watts; 400BTU/hr max.
Advertisement
Table of Contents
