After setup is complete, press "Apply" button for enable the port-based VLAN. The screen in figure 4- 9 appears.
Press "Add New" to create a new port-based VLAN group. The screen in figure 4-10 appears.
Note:
Up to 26 port-based VLAN groups can be added and the group ID range is 1-255.
After setup is complete, press "Apply" button for save the current configuration. The screen in figure 4- 11 appears with
message "Operation completed successfully!"
Press "Back" for back to previous web screen. It also support delete the existence VLAN group by press "Delete" button
from VLAN Configure screen (figure 4-9).
Figure 4-8 VLAN Configuration Screen
Figure 4-9 VLAN Configuration Screen
Figure 4-10 VLAN Configuration Screen
Figure 4-11 VLAN Configuration save successfully Screen