Table of Contents
Advertisement
configure system manena X
Permits access to the Model 2120 Software Command System via a
remote Telnet session over the LAN.
Accessibility: READ/WRITE
Default: yes
Valid Entries: yes, no
Note
If disabled, access to the Model 2120 Software Command Sys-
tem can is only possible via the serial interface.
configure system maninactiveto X
Sets the period of time (in minutes) that the 2120 will close an inactive
Telnet session.
Accessibility: READ/WRITE
Default: 15 (minutes)
Valid Entries: 0 – 10080
Note
Entering a 0 for this parameter will disable this feature and allow
a Telnet session for an unlimited period of time.
configure system manport X
Management port
configure system prompt X
Sets system command prompt.
Accessibility: READ/WRITE
Default: TS>
Valid Entries: Any alphanumeric entry with a string size up to 32 bytes
Note
The system prompt may be changed to uniquely identify multi-
ple 2120 units.
configure system subnetcfg X
Sets the Subnet Mask of the 2120 unit.
Accessibility: READ/WRITE
Default: 255.255.255.0
Valid Entries: Any in Subnet Mask format
Note
Must match the Subnet Mask of the LAN that the 2120 unit is
connected to.
configure userdatabase
Returns User Database Help Menu.
Accessibility: N/A
Default: N/A
Valid Entries: N/A
Note
Needs to be entered first in all "userdatabase" command
strings.
68
Advertisement
Table of Contents
