Patton electronics 2120 User Manual page 64

Accessibility: READ/WRITE
Default: 0.0.0.0
Valid Entries: Any in IP address format.
configure eia232 ppp rxaccm X
Receive async contrl character map
configure eia232 ppp txaccm X
Transmit async contrl character map
configure eia232 ppp userauthprot X
Permits the use of PAP as a user authentication protocol with PPP oper-
ations.
Accessibility: READ/WRITE
Default: none
Valid Entries: none, pap
configure eia232 rawtcp_telnet
Returns the Configure EIA232 RawTCP/Telnet Help Menu.
Accessibility: N/A
Default: N/A
Valid Entries: N/A
Note Needs to be entered first in all "configure eia232 rawtcp_telnet"
command strings.
configure eia232 rawtcp_telnet confromlocena X
Permits the automatic connection request to a remote device over the
LAN.
Accessibility: READ/WRITE
Default: no
Valid Entries: yes, no
Note To activate the auto connection feature, this must be set to YES,
"configure eia232 rawtcp_telnet conretryfreq" must be set to any
number (up to 65535) other than 0, and a valid IP address must
be entered into "configure eia232 rawtcp_telnet remip".
configure eia232 rawtcp_telnet confromremena X
Permits incoming connection requests to the serial interface from a
remote device over the LAN.
Accessibility: READ/WRITE
Default: yes
Valid Entries: yes, no
configure eia232 rawtcp_telnet conretryfreq X
Sets the connection retry frequency (in seconds) that automatic connec-
tion requests are sent to a remote device.
Accessibility: READ/WRITE
64