Table of Contents
Advertisement
configure eia232 interface rxbuflen X
Receive buffer length <num char>.
configure eia232 interface stoplength X
Sets the RS-232 Stop Length (in bits) of the serial interface.
Accessibility: READ/WRITE
Default: 1 (bit)
Valid Entries: 1, 2
configure eia232 interface subnetcfg X
Sets the Subnet Mask used to conduct PPP or SLIP operations.
Accessibility: READ/WRITE
Default: 255.255.255.0
Valid Entries: Any in Subnet Mask format
Note
Must match the Subnet Mask of the LAN used to conduct PPP
or SLIP operations.
configure eia232 nvt echoena X
Echo Enable
configure eia232 nvt endofrecordena X
End-Of-Record Enable
configure eia232 nvt linemodeena X
Line Mode Enable
configure eia232 nvt terminaltype X
Terminal Type
configure eia232 nvt timingmarkena X
Timing Mark Enable
configure eia232 nvt transmitbinaryena X
Transmit Binary Enable
configure eia232 ppp
Returns the PPP Help Menu
Accessibility: N/A
Default: N/A
Valid Entries: N/A
Note
Needs to be entered first in all "configure eia232 ppp" command
strings.
configure eia232 ppp dhcpena X
Permits DHCP client operations to obtain an IP address for PPP.
Accessibility: READ/WRITE
Default: no
Valid Entries: yes, no
62
Advertisement
Table of Contents
