Table of Contents
Advertisement
5.
Enter your FTP Password by typing: < your e-mail address > and
pressing <Enter>.
6.
At the FTP prompt, type: get <current 2120 software file-
name> and press <Enter>.
7.
When completed, type: quit and press <Enter> to return to the TS
prompt.
8.
At the TS prompt, type: <activateimage> and press <Enter>.
9.
Once the image is activated, you will lose your connection to the
Model 2120.
To verify new software version, TELNET back into the 2120 by typing
telnet < the IP address of the 2120> and pressing <Enter>. The
new software version should be listed at the top of the screen.
48
Advertisement
Table of Contents
