Patton electronics 2120 User Manual page 66

Accessibility: READ/WRITE
Default: UNDEFINED (no entry)
Valid Entries: Any alphanumeric entry with a string size up to 32 bytes
configure eia232 rawtcp_telnet remuserid X
Sets/activates the User ID sent with automatic connection requests to a
remote device/application over the LAN.
Accessibility: READ/WRITE
Default: UNDEFINED (no entry)
Valid Entries: Any alphanumeric entry with a string size up to 32 bytes
configure eia232 rawtcp_telnet sestermchar X
Sets character string that is required to terminate a connection to the
serial interface.
Accessibility: READ/WRITE
Default: 0x04 (Control-D)
Valid Entries: Hexadecimal entry for desired session termination character.
configure eia232 rawtcp_telnet uicmdena X
User Interface Command Enable
configure ipfwd ipfwdena X
IP forwarding enable
configure ipfwd natipaddr X
NAT IP address
configure resetnv
Performs a software reset (to factory defaults) of all non-volatile configu-
ration parameters. When performed, session is lost.
Accessibility: N/A
Default: N/A
Valid Entries: N/A
Note Will not reset factory assigned MAC/NIC address, but will reset
the IP address.
configure system
Returns the Configure System Help Menu.
Accessibility: N/A
Default: N/A
Valid Entries: N/A
Note Needs to be entered first in all "configure system" command
strings.
configure system bootmessdispena X
Permits the display of the Boot Message (Model 2120 Terminal Server
Software Version ?.?.?) on the serial interface.
Accessibility: READ/WRITE
66