Patton electronics 2120 User Manual page 63

Note When set to YES, the 2120 will automatically request and use
an IP address assigned by the DHCP Server for PPP opera-
tions. This feature will not function unless there is an active
DHCP Server on the LAN.
configure eia232 ppp fcslength X
FCS length
configure eia232 ppp dhcpwaddr X
DHCP hardware address
configure eia232 ppp peeripaddruseena X
Permits the 2120 to obtain an IP address from the PPP client device con-
nected to the serial interface for PPP operations.
Accessibility: READ/WRITE
Default: no
Valid Entries: yes, no
configure eia232 ppp peernsaddruseena X
Permits the Model 2120 to obtain name server addresses from the PPP
client device connected to the serial interface.
Accessibility: READ/WRITE
Default: no
Valid Entries: yes, no
configure eia232 ppp pridnsaddr X
Sets the address of the primary DNS used to support DNS address
exchange with the client device connected to the serial interface.
Accessibility: READ/WRITE
Default: 0.0.0.0
Valid Entries: Any in IP address format.
configure eia232 ppp priwinsaddr X
Sets the address of the primary WINS used to support WINS address
exchange with the client device connected to the serial interface.
Accessibility: READ/WRITE
Default: 0.0.0.0
Valid Entries: Any in IP address format.
configure eia232 ppp secdnsaddr X
Sets the address of the secondary DNS used to support DNS address
exchange with the client device connected to the serial interface.
Accessibility: READ/WRITE
Default: 0.0.0.0
Valid Entries: Any in IP address format.
configure eia232 ppp secwinsaddr X
Sets the address of the secondary WINS used to support WINS address
exchange with the client device connected to the serial interface.
63