Setting The Internet Parameters; Setting The User Parameters For The Lan Interface - Panasonic DP-2000 Operating Instructions Manual

INSTALLING YOUR MACHINE

Setting the Internet Parameters

Setting the User Parameters for the LAN Interface

Depending on how the DP-2000 will be configured to communicate on the LAN, the appropriate parameters
listed in the table below must be stored first. (See pages 12 to 16)
Parameter
1 DATE & TIME
2 LOGO
3 CHARACTER ID
4 ID NO.
5 TIME ZONE
6 (MAC ADDRESS)
7* IP ADDRESS
8* SUBNET MASK
9* SMTP SERVER NAME
10* SMTP SERVER IP ADDR
11* DEF. ROUTER IP ADDR
12* EMAIL ADDRESS
13* DNS SERVER IP ADDRESS
14*
POP SERVER NAME
15* POP SERVER IP ADDR
16* POP USER NAME
17* POP PASSWORD
18* HOST NAME
19 DEFAULT SUBJECT
20 DEFAULT DOMAIN
21 SELECTABLE DOMAINS (01) ~
(10)
22 REMOTE PASSWORD
23 RELAY XMT PASSWORD
24 MANAGER'S EMAIL ADDR
25 RELAY DOMAIN (01) ~ (10)
* Contact your Network Administrator for this Information.
26
Comments
Current Date and Time.
Up to 25 characters & digits.
Up to 16 characters & digits.
Your Fax Telephone Number. (Up to 20 digits)
The Time Zone is required as part of the Email header information when
sending Internet faxes.
Hardware Address hard-coded into the DP-2000. (If required, can be obtained
from the 2nd page of the Fax Parameter List printout, by pressing.
[FUNCTION] [6] [4] [SET])
IP Address assigned to your DP-2000.
Subnet Mask assigned by the Network Administrator.
The name of the SMTP Mail Server. (Up to 60 characters)
IP Address of the SMTP Mail Server.
IP Address of your Default Router.
The Email Address assigned to your DP-2000 for sending and receiving. (Up
to 60 characters)
IP Address of the DNS Server. If the DNS Server is not available, change the
setting of the Fax Parameter No. 161 (DNS Server) to "Invalid", then enter the
IP Address instead.
Name of the POP Mail Server.
IP Address of the POP Mail Server.
User Name assigned to your DP-2000. (Up to 40 characters)
Password assigned to your DP-2000. (Up to 10 characters)
The Host Name assigned to your DP-2000. (Up to 60 characters)
The default information to be added to the Subject Line for all outgoing Email
(up to 40 characters). To manually input this information before transmission,
change the Fax Parameter No. 159 (SUBJECT LINE ENTRY) to "2:Valid".
When the outgoing email address is incomplete by SMTP standards, the
Frequently Sent Domain specified here will be automatically added to the
email address. This feature is also useful as a shortcut when manually
entering email addresses to a frequently used Domain. (Up to 50 characters)
Enter up to 10 Domain Names that can be selected after the Domain "@" key
is pressed using the "\/ or /\" key during Manual email addressing. (Up to 30
characters)
This is a security password that allows Remote Programming of the Internet
Parameters and Auto Dialer or the retrieval of the Journal via an Email. (Up to
10 characters)
A password that provides Network security for your Relay Station (used
exclusively for G3 relay purposes). (Up to 10 characters)
Department Manager's Email Address for notification of all Internet relayed
transmissions for supervision and cost control purposes. (Up to 60 characters)
Enter up to 10 Domain Name(s) that have been authorized to access your
Internet Fax for Relayed XMT Request. (Up to 30 characters)
Relay Domain, a.k.a. Domain Name in the DX-1000/2000.