Setting Up Your Machine For Relayed Transmission; Programming The End Receiving Station Into Your Auto Dialer - Panasonic DP-2000 Operating Instructions Manual

Relayed Transmission

Setting Up Your Machine for Relayed Transmission

Programming the End Receiving Station into your Auto Dialer

If the Fax Parameter No. 140 (LAN RELAY XMT REQUEST) is set to "Valid", you can enter the Relay Address
(ABBR No.) by the following procedure.
To set a One-Touch/ABBR for Relayed Transmission Request
Make sure that the INTERNET lamp is ON. If not, press
1
2
Ex:
3
Press a One-Touch key (01-20).
Ex:
4
To change the input mode (between "ENTER EMAIL
ADDRESS" and "ENTER TEL. NO."), press
5
Enter the telephone number (up to 36 digits).
If the Relay and the End Receiving Stations are both in the
same area, omit the Country Code and the Area Code from
the End Receiving Station. The End Receiving Station is a
local telephone number as viewed from the Relay Station.
6
7
Enter the station name by using the character keys (up to 15
characters).
Ex:
R O M E
8
Continued on the next page...
NETWORK FEATURE
to select the "INTERNET MODE".
1:ONE-TOUCH
2:ABBR NO.
ONE-TOUCH< >
PRESS ONE-TOUCH
<01>
ENTER EMAIL ADDRESS
<01>
or . ENTER TEL. NO.
<01>
3961111234
<01> ENTER NAME
3961111234
<01> ROME
3961111234
<01> RELAY ADDRESS
107