Subject Line Entry
General Description
The DP-2000 will automatically add the Default Subject information that was entered during the User Parameter
setup, to the Subject Line of all outgoing emails.
If you would like for the machine to prompt you for the Subject before each email transmission, change the Fax
Parameter No. 159 (SUBJECT LINE ENTRY) to "2:Valid".
Sending Email with Subject Line Entry
Make sure that the INTERNET lamp is ON. If not, press
1
a
or
1
b
Place a book or an original face down on the Platen
Glass.
2
Enter email addresses by any combination of the following
methods:
• One-Touch Dialing
• Abbreviated Dialing
• Directory Search Dialing, press
email address is entered.
• Manual Number Dialing, press
station is entered (up to 70 addresses).
Ex:
3
Continued on the next page...
Place original(s) face up on the ADF.
SET
SET
ADVANCED FEATURES
to select the "INTERNET MODE".
ENTER STATION(S)
THEN PRESS START 00%
after each
after each
<01>(Station name)
abc@panasonic.com
ENTER SUBJECT OR
PRESS START TO SEND
93