To Retrieve The Internet Parameters For Backup - Panasonic DP-2000 Operating Instructions Manual

INSTALLING YOUR MACHINE
Programming or Retrieving Parameters via Email

To Retrieve the Internet Parameters for Backup

To retrieve the existing Internet Parameters, send a plain text email to the DP-2000's email address with the
following command in the "Subject" line:
#get parameters(password)# : where the "password" is the Remote Password programmed in the DP-2000's
Retrieving the Internet Parameters Sample
(1) To
From
Subject
30
User Parameters (i.e. 123456789).
Password in the User Parameters. If it was not programmed, signify with "()"
(i.e. #get parameters()#).
Make sure that the CC..., Bcc... lines and the body of the email message is
Blank.
(1)
: The DP-2000's email address.
: This field is normally not visible when creating new email message(s). It is your default
email address (email application), for retrieving the Internet Parameters and for error
message notification.
(Can be programmed with the configuration tool of your email program.)
: To Retrieve data, type: #get parameters(password)#
For security, always input a Remote