Programming Or Retrieving Parameters Via Email; Using Email To Program Or Retrieve Parameters; Using A Pc To Input The Internet Parameters Remotely - Panasonic DP-2000 Operating Instructions Manual

Programming or Retrieving Parameters via Email

Using Email to Program or Retrieve Parameters

This feature is a powerful tool, which provides a convenient and easy way of retrieving or programming Internet
Parameters, One-Touch, ABBR Dialing Numbers, Program keys and Journal retrieval from your PC by sending
a text email message to the DP-2000.
Using your email application's "Subject:" line as a command-input field, you can request the DP-2000 to
perform the following commands:
1 #set parameters(password)#
2 #get parameters(password)#
3 #set abbr(password)#
4 #get abbr(password)#
5 #get jnl(password)#
Where: "set" is used to program the data

Using a PC to Input the Internet Parameters Remotely

This feature provides a convenient and an easy way to input the Internet Parameters right from your PC by
sending a text email message to the DP-2000.
The following parameters can be input remotely via a PC. The other parameters must be entered from the
machine in the User Parameters. (See page 26).
- Sender Selection (up to 24 User Names, see page 89)
- Default Domain
- Selectable Domains (up to 10 additional Domain Names)
- Remote Password
- Manager's Email Address
- Relay XMT Password
- Relay Domain (up to 10 Domain Names authorized for Relay XMT Request)
The DP-2000 interprets the command that you enter in the "Subject" line of your email message and performs
one of the following functions, it Retrieves or Stores data into the Internet Parameters (User Parameters).
The two types of commands that can be entered in the "Subject" line of your email:
1) To Store data, type : #set parameters(password)# : where the "password" is the Remote Password
2) To Retrieve data, type : #get parameters(123456789)#
NOTE
1. To activate this feature, change the Fax Parameter No. 158 (PC REMOTE UPDATE) to "Valid". (See page 58)
"Subject:" Line Command
"get" is used to retrieve the data
"parameters" represents Internet Parameters
"abbr" represents Auto Dialer
"jnl" represents Journal
"password" is the Remote Password programmed in the DP-2000's User Parameters
(i.e. 123456789). Must be enclosed within the parenthesis "( )".
The command must be enclosed within the hash (#) signs.
INSTALLING YOUR MACHINE
Function
Programs the Internet Parameters
Retrieves the Internet Parameters
Programs the Auto Dialer
Retrieves the Auto Dialer Data
Retrieves the current Journal data
programmed in the DP-2000's User Parameters (i.e.
123456789).
You can enter the Internet Parameters shown above
with this command the first time. However, if these
fields already contain data, do not use this command
as the existing information will be deleted and
overwritten. Use the Retrieve command below
instead, refer to pages 30 to 34.
(see Note 1)
27