To Edit The Retrieved Or Backup One-Touch/Abbr. No. Data File - Panasonic DP-2000 Operating Instructions Manual

Programming or Retrieving Parameters via Email

To Edit the Retrieved or Backup One-Touch/ABBR. No. Data File

After receiving the DP-2000 email with the auto dialer data, store the email file as text (.txt) on your PC for
backup purposes.
To change or update the auto dialer, follow the steps below:
1. Create a New Email Message, fill out the "To" and "From" Address line and the Subject line information for
section (1) below:
To : The DP-2000's email address.
From : This field is normally not visible when creating new email message(s). It is your default email
address, for retrieving the One-Touch/ABBR. No. data and for error message notification.
Subject : To Store data, type: #set abbr(password)#
2. Open the backup, auto dialer text file. Copy the body text and paste it on the body of the newly created
email message.
3. Delete any headers that may be present in the body of the email, as unsupported data will be rejected.
The information following the "#" sign is ignored by the DP-2000.
4. Edit and/or add additional One-Touch/ABBR. No. stations.
5. When finished, use the "File/Save as..." command and save the updated file with ".txt" extension as a
backup.
6. Send the email message to the DP-2000 to update the auto dialer.
DP-2000 Auto Dialer Email Sample
Continued on the next page...
(1)
[Delete this header before sending email]
(a) (c)
(b)
(a) (c)
(b)
(d)
(e) (3)
(f)
(g)
(h)
INSTALLING YOUR MACHINE
(5)
(e)
(d)
(2)
(f)
(4)
41