Customizing Your Machine; Setting The Fax Parameters - Panasonic 403171 Operating Instructions Manual

Customizing Your Machine

Your facsimile machine has a variety of adjustable Fax Parameters. These parameters, listed in the Parameter
Table, are preset for you and do not need to be changed. If you do want to make a change, read the table
carefully. Some parameters, such as the Resolution, Contrast, and Verification Stamp parameters, can be
temporarily changed by simple key operation just before a transmission is made. When the transmission ends,
however, these parameters return to their preset values (Home position). Other parameters can only be changed
by the procedure described below.

Setting the Fax Parameters

Make sure that the FAX lamp is ON. If not, press
1
2
3
Enter Fax Parameter number from the Parameter Table.
(See page 28 to 31)
Ex:
0 0 4
4
5
Enter the new setting value.
Ex: for ON
2
6
To set another parameter, press
3 or press
(see Note 1) (see Note 2)
NOTE
1. To scroll the Fax Parameters in Step 2 or 4, press
2. To print a Fax Parameter List, see page 141.
for STAMP
CLEAR
to return to standby.
STOP
PROGRAMMING YOUR MACHINE
to select the "FAX MODE".
SET MODE
ENTER NO. OR
FAX PARAMETER(1-99)
FAX PARAMETER(1-99)
04 STAMP(HOME)
1:OFF
04 STAMP(HOME)
2:ON
05 MEMORY(HOME)
2:ON
to return to step
or .
(1-4)
∨ ∧
NO.=
NO.=004
27