Abbreviated Email Addressing - Panasonic DP-2000 Operating Instructions Manual

Sending Documents via LAN

Abbreviated Email Addressing

Abbreviated dialing / addressing is a fast way of dialing full telephone numbers or email addresses. To use
these dialing or addressing methods, you must first store the telephone numbers or email addresses into the
Auto Dialer with a 3-digit abbreviated code. (See page 48)
Make sure that the INTERNET lamp is ON. If not, press
1
a
or
1
b
Platen Glass.
2
Press
ABBR
Ex:
If a telephone number is stored into the ABBR station, the
display shows:
3
The document(s) is stored into memory with a file number.
Then connects to the LAN and starts sending the email
message.
(see Note 1) (see Note 2)
NOTE
1. If your machine sounds an alarm (pi-pi-pi) in Step 2 above, this indicates that the Dialer is Full (more than 70
transmission reservations including G3 communication have been already reserved).
2. If the transmission cannot be completed for any reason, the email may be returned undelivered; otherwise no
reply will be printed.
Place original(s) face up on the ADF.
Place a book or an original face down on the
and then enter a 3-digit code (001 to 175).
BASIC OPERATIONS
to select the "INTERNET MODE".
ENTER STATION(S)
THEN PRESS START 00%
[100](Station name)
xyz@panasonic.com
[100](Station name)
5553456
* STORE *
PAGES=001
* STORE * COMPLETED
TOTAL PAGES=005
ON LINE * MEM.XMT *
ID:(Station name)
NO.001
01%
25%
65