System Programming And Diagnosis With Personal Computer - Panasonic KX-TD612E Features Manual

1.1 General Features
System Programming and Diagnosis with
Personal Computer
Description
This system can be programmed and administered using a personal computer (PC) connected
to a Serial Interface (RS-232C) port. There are 3 types of possible connections.
• PC — KX-TD612
• PC — Central Office — KX-TD612
• PC — KX-TD612 — Central Office — KX-TD612
Refer to 2.2.7 System Programming and Diagnosis with Personal Computer in Installation
Manual. There are 4 functions as follows.
On-Site/Remote System Administration by PC Programming Software
By connecting a personal computer (PC) to your system, system programming and
maintenance can be performed. There are 2 types of PC programming software. One is the
standard version and the other is the feature limited version. The password (4-7 digits)
determines which of the software is set up. The password to set up the standard version is
[TD612] only. And the one to set up the feature limited version is programmable (default: no
password). Following programming is available in the feature limited version.
1. System Programming [000] through [024] and [811].
2. Station Programming
On-Site/Remote Software Download
You can download the software of the KX-TD612 by using the PC connected to the main unit.
Remote software download is to be possible through the Integrated Services Digital Network.
On-Site/Remote Software System Change
Allows you to change the systems leaving the power switch on by a digital proprietary
telephone or PC connected to a Serial Interface (RS-232C) port of your system. You can set up
the system again after a new system is adopted.
On-Site/Remote Maintenance
You can perform the remote maintenance and programming as well as the on-site maintenance
by using a personal computer through the Integrated Services Digital Network.
Conditions
• A digital proprietary telephone can be used to perform System Programming.
• To connect with a remote KX-TD612, the system password of KX-TD612 is necessary.
• Least Cost Routing (LCR) feature does not work, when making a call on "PC — KX-
TD612 — Central Office — KX-TD612" connection.
244 Features Guide