Panasonic KX-TD612E Features Manual page 29

• If the company (operator) message box receives a message, a call log entry will be stored
in an extension according to the priority as follows.
Operator 1 > Operator 2 > Manager > Jack 1-1
• If nothing is stored, such as the caller's name, that part will be blank.
• It is possible to prevent an other user from referring to the call log on the extension. The
operator can cancel the prevention feature remotely (Call Log Lock Control).
• The display will change as follows after you see a call log entry.
Display example: OLD3 NEW1
This is not applicable when you replay the message by entering the feature number. In this
case, the LED indicator of the MESSAGE button turns off.
• If you change call log information, the change cannot be cancelled.
• Rotate the jog dial to the right or press VOLUME button — UP to see the next call log entry.
Rotate the jog dial to the left or press VOLUME button — DOWN to see the previous call
log entry.
• LCR cannot be used when you call back by using a call log.
Programming Guide References
• [222] OGM Recording Time
• [223] Built-in Voice Message Recording Time
• [455] Built-in Voice Message for Call Handling
• [456] Call Handling When All Busy
• [457] Intercept Extension
• [625-626] Built-in Voice Message for Extension — Day/Night
• [627] Voice Message Resource Assignment
• [628] Built-in Voice Message Access Code through CO Line
• [820] OGM Recording
• [822] Built-in Voice Message Total Recording Time
• [895] OGM and Voice Message Clear
Features Guide References
• Call Log, Incoming
• Intelligent Call Handling — Distribution of Incoming Outside Calls
• Message Waiting
• Outgoing Message (OGM)
User Manual References
• 2.5.1 Built-in Voice Message
• 2.9.1 Calling Using the Call Log (Incoming Call Log) [KX-T7433, KX-T7436, KX-T7230,
KX-T7235 only]
• 3.2.3 Recording Company Greeting Outgoing Messages
• 4.1.3 Customising the Buttons
Features Guide
OLD4 NEW0
1.1 General Features
29