Panasonic KX-TD612E Features Manual page 271

• This feature requires assigning an UCD group in System Programming. An extension can
belong to 2 or more UCD groups.
• The floating number can be assigned on a hunting group basis. The UCD group is based on
the hunting group.
• It is possible to set the log-in or log-out status on an extension basis. An UCD call can be
sent to an extension in log-in status within the UCD group, but cannot be sent to extensions
in log-out status. If the extension would like to leave the group temporarily, the extension
sets the log-out status by the feature number to prevent UCD calls being sent to his/her
extension. When the extension re-joins the group, the extension sets the log-in status.
• If all extensions are in the log-out status, the extensions assigned to Intelligent Call
Handling table 61 (day mode) and 62 (night mode) will ring.
• If a UCD call is not answered within the intercept time ([203] Intercept Time), the call will
go to the intercept extension ([457] Intercept Extension).
• For time tables to work, you need to set the queue length to 1 or greater in programme [131]
Hunting Group Assignment.
Programming Guide References
• [106] Station Hunting Type
• [131] Hunting Group Assignment
• [133] Hunting Overflow
• [134-135] Hunting Intercept — Day/Night
• [137-138] Time Table Assignment — Day/Night
• [139] Time Table
• [453] Other Extension Ringing Assignment
• [456] Call Handling When All Busy
• [457] Intercept Extension
• [813] Floating Number Assignment
Features Guide References
• Intelligent Call Handling — Distribution of Incoming Outside Calls
• Log-In/Log-Out
• Station Hunting
User Manual References
Not Applicable
Features Guide
1.1 General Features
271