Panasonic KX-TD612E Features Manual page 57

• If something is not stored, such as the caller's name, that part will be blank.
• When the outside call rings at multiple extensions (1:N reception), the information will be
logged at the DPT with the lowest extension number.
• If the LED indicator of the SHIFT button is red, there are unanswered calls.
• Once you change call log information, the change cannot be cancelled.
• It is possible to prevent an other user from referring to the call log on the extension. The
operator can cancel the prevention feature remotely (Call Log Lock Control).
• The display will change as follows after you see a call log entry.
Display example: OLD3 NEW1
• LCR cannot be used when you call back by using a call log.
Programming Guide References
• [001] System Speed Dialling and Intelligent Call Handling Number Set
• [002] System Speed Dialling and Intelligent Call Handling Name Set
• [100] Flexible Numbering
Features Guide References
• Built-in Voice Message
• Intelligent Call Handling — Distribution of Incoming Outside Calls
User Manual References
• 2.5.1 Built-in Voice Message
• 2.9.1 Calling Using the Call Log (Incoming Call Log) [KX-T7433, KX-T7436, KX-T7230,
KX-T7235 only]
• 2.9.2 Recording a Call Log [KX-T7433, KX-T7436, KX-T7230, KX-T7235 only]
• 3.1.2 Changing the Settings
Features Guide
OLD4 NEW0
1.1 General Features
57