Initial Setting For Kx-T7200 Series; Display Contrast Adjustment; When Using The Headset; Changing The Ringing Tone Of A Co Button - Panasonic KX-TD308 User Manual

1.1

Initial Setting for KX-T7200 Series

Display Contrast Adjustment (KX-T7230 and KX-T7235 only)
A Soft button and the VOLUME Control button are used to adjust the display contrast.
The contrast level is indicated on the display by the number of asterisks. You can adjust
the contrast level under the following conditions:
1.) When on-hook, or
2.) During an outside/intercom call.
1
CONT
S 1 S 2
2
VOLUME

When using the headset

The Panasonic Digital Super Hybrid System supports the use of a headset with a
proprietary telephone (PT). When you use the headset (optional), you should switch the
selection mode first. Selection is explained in the "Handset/Headset Selection" in Station
Programming (Section 2).
To change to the headset mode
Press: [PROGRAM] [9] [9] [9] [2] [STORE] [PROGRAM].

Changing the ringing tone of a CO button

There are eight ringer frequencies available for each CO (Loop-CO, Single-CO) button.
If you wish to change them, refer to the "Ringing Tone Selection for CO Buttons" in
Station Programming (Section 2).
1-22
DPT Overview
Configuration
1. Press the CONT (S1) button.
S 3
2. Press the VOLUME (UP
• The display shows:
<Example>
/ DOWN
Contrast:***
) Control button.
(— contrast volume level 3)