Panasonic KX-TD308 User Manual page 58

2.2 Station Programming (Personal Programming)
Single-CO (S-CO) Button
Allows you to assign a Flexible CO button as a Single-CO button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1
2
0
3
outside line number
4
AUTO DIAL
STORE
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Conditions
• You cannot assign the same outside line to more than one S-CO button on a
proprietary telephone.
• You can assign an outside line to a S-CO button.
(Assignment)
1. Press the Flexible CO button which you wish to assign as an
S-CO button.
2. Dial 0.
• The display shows:
CO—
CLR
3. Enter the outside line number (1 through 3).
• The display shows:
<Example>
CO—x
CLR
• To erase an incorrect entry, press the CLR (S2) button or the
TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button when using the
overlay.)
4. Press the STORE button.
• The STORE indicator lights.
• The display shows the initial programming mode.
Station Programming (Personal Programming)
(— x: outside line number)
2-17