Panasonic KX-TD308 User Manual page 181

M
Canceling
1
2
7 0
3
extension number
4
Checking and Selecting a message notification by the receiver
1
MESSAGE
Calling back the message notification sender
1
2
MESSAGE
3
4-84
DPT Features
1. Lift the handset or press the SP-PHONE/MONITOR button.
2. Dial the feature number (70) and 0.
0
3. Dial the extension number where you left a message.
• You hear a confirmation tone and then a dial tone.
4. Hang up or press the SP-PHONE/MONITOR button.
If there is any message, the message waiting lamp (MESSAGE
indicator) light will be on.
When the telephone is idle and on-hook;
1. Press the MESSAGE button repeatedly until the desired
message appears.
• The stored messages are shown on the display in the order
they were received.
<Example>
When Tony at extension 12 left a message, the display
shows:
12:Tony
1. Lift the handset or press the SP-PHONE/MONITOR button.
• You hear dial tone 4*.
2. Press the MESSAGE button or dial the feature number (70)
and 2.
• If you have more than one message at your extension, the
line connects to the message sender which you select.
3. Start talking.
• The message is cleared after the conversation.
4.2 DPT Features