Voice Mail (Vm) Transfer Button - Panasonic KX-TD308 User Manual

2.2 Station Programming (Personal Programming)

Voice Mail (VM) Transfer Button

Allows you to assign a Flexible CO button as the VM Transfer button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1
2
8
3
VM extension number
4
AUTO DIAL
STORE
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Conditions
• You cannot enter non-existent extension or a floating number*.
• Through System Programming, "VM Command DTMF Set" and "Station Hunting
Type" must be programmed to match the operation of your Voice Processing System.
Programming References
• System Programming — Installation Manual
[106] Station Hunting Type
[114] VM Command DTMF Set
* A Floating Number (FN) is a virtual extension number which appears to be an extension.
For more details, please consult with your dealer.
2-20
Station Programming (Personal Programming)
(Assignment)
1. Press the Flexible CO button you wish to assign as the VM
Transfer button.
2. Dial 8.
• The display shows:
VTR-
CLR
3. Dial the Voice Mail extension number.
• The display shows:
VTR-xxxx
CLR
• To erase an incorrect entry, press the CLR (S2) button or
the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button while in the
programming mode.)
4. Press the STORE button.
• The STORE indicator lights.
• The display shows the initial programming mode.
(— xxxx: VM extension
number)