Panasonic KX-TD308 User Manual page 186

4.2 DPT Features
To talk to the third party
1
To talk to the third party by terminating the current call
1
To talk to the third party by holding the current call
1
HOLD
Conditions
• Class of Service programming determines which extensions can perform this.
• This feature works when the called party is off-hook and the telephone INTERCOM
button is idle.
• You can select to receive a Call Waiting tone, OHCA, Whisper OHCA or none of
these at your extension.
• If the "Do Not Disturb (DND)" feature is set at the called extension, you must
activate the "Do Not Disturb (DND) Override" feature before OHCA is available.
Programming References
• System Programming — Installation Manual
[509] Off-Hook Call Announcement (OHCA)
Feature References
Busy Station Signaling (BSS)
Call Waiting
Whisper OHCA
If you hear two beeps and a voice announcement;
1. Consult with the third party by microphone.
• The called extension display shows the calling extension's
number or name for 5 seconds in 10 second intervals.
• You can talk to two parties independently.
If you hear two beeps and a voice announcement;
1. Hang up.
• The current call is disconnected.
• The INTERCOM indicator light turns green.
• You can talk in handsfree mode.
If you hear two beeps and voice announcement;
1. Press the HOLD button.
• The current call is placed on hold.
• The INTERCOM indicator light flashes green slowly.
O
4-89
DPT Features