Led Indication - Panasonic KX-TD308 User Manual

1.1

LED Indication

The Light Emitting Diode (LED) buttons indicate the line conditions with lighting
patterns.
Flashing light patterns
Slow flashing
(60 flash/min.)
Moderate flashing
(120 flash/min.)
Rapid flashing
(240 flash/min.)
LED Indication on the INTERCOM Button
The table below shows the lighting patterns for intercom line conditions.
INTERCOM button
Off
Green On
Green slow flashing
Green moderate flashing
Green rapid flashing
LED Indication on the CO Button
The table below shows the lighting patterns for outside line conditions.
Off
Green On
Green slow flashing
Green moderate flashing
Green rapid flashing
Red On
Red slow flashing
BLF on DSS Button
The Busy Lamp Field (BLF) indicator button is red when the corresponding extension is
busy. This is available for flexible CO buttons assigned as DSS buttons on proprietary
telephones.
Configuration
1 sec.
CO Button
— Items with a * are only available on the Single-CO button.
Intercom Line Condition
Idle
Intercom call / Conference established
Intercom call hold
Intercom call exclusive hold / Consultation hold
Incoming intercom/doorphone call
Outside Line Condition
Idle
I-use
I-hold
I-exclusive hold / Outside-to-outside line call /
Conference, Unattended
Privacy Release possible* / Hold Recall /
Incoming call
Other-use / Log-out
Other-hold*
DPT Overview
1-25