Idle Extension Hunting - Panasonic KX-TA824 Feature Manual

9.2.2 Feature settings [2-2]—Hot Line for SLT
Operating Manual References
1.3.50 Hot Line

1.1.67 Idle Extension Hunting

Description
If a called extension is busy, Idle Extension Hunting redirects the call to an idle member of the same
extension group, if that group has been assigned as an idle extension hunting group through system
programming (
preprogrammed hunting type (
This feature is also known as Station Hunting.
Type
Circular Hunting
Terminated Hunting
Conditions
• Idle Extension Hunting applies to:
Intercom calls and outside (CO) line calls directed to a single extension.
• An extension can belong to only one extension group (
can be programmed for each extension group.
• If all the searched extensions are busy in an idle extension hunting group, a busy tone will be heard at
the extension that made the intercom call (including Direct Inward System Access [DISA] calls).
• A user can leave an idle extension hunting group temporarily by logging out of the group, and rejoin the
group by logging back in (
• FWD/DND Mode
When searching for an idle extension within an idle extension hunting group, any extension that has set
[100] Hunting Group Set). Idle extensions are automatically searched for according to a
[101] Hunting Type).
An idle extension is searched for in a circular fashion one time according
to the numerical order of the jacks.
Extn.
Numerical order
An idle extension is searched for in the numerical order of the jacks, until
reaching the extension that is connected to the highest-numbered jack in
the group.
Incoming call
Extn.
Numerical order
1.1.80 Log-in/Log-out).
Description
Incoming call
Busy Busy
Extn. Extn.
Highest-
numbered jack
Busy Busy Busy
Extn. Extn. Extn.
[600] Extension Group). One hunting type
1.1 General Features
Busy
Extn.
Feature Manual 93