Panasonic KX-TA824 Feature Manual page 144

1.1 General Features
1.
Time Service Switching Mode
The current time service mode can switch automatically to another time service mode at the time
assigned in the Time Table. It is possible, however, to switch time service modes manually.
Whether time service modes are normally switched manually or automatically is determined through
system programming (
Switching Mode
Automatic
Manual
2.
Time Table
A Time Table has 3 modes—day, night, and lunch. A Time Table can be programmed to control when
each time service mode starts (and therefore, the previous time service mode ends), and can be
programmed separately for each day of the week.
[Programming Example: Time Table]
Time Schedule*
Sunday
Monday
Tuesday
(Cont.) :
:
* [007] Time Service Start Time
[Visualization of Time Schedule]
00:00
Time Table
Day
Note that time service modes can be arranged as they are needed (for example, night mode can occur
in the morning and afternoon, if necessary) and not all time service modes need to be used in a time
144 Feature Manual
[006] Time Service Switching Mode).
The current time service mode will switch
automatically to another time service mode at
the time assigned in the Time Table, and can be
switched manually by pressing the Day, Night,
or Lunch button or by entering the Time Service
feature number.
The current time service mode will switch only
when the Day, Night, or Lunch button is pressed
or when the Time Service feature number is
entered.
Day
Start Time
Not Stored
09:00
09:00
:
:
Monday
03:00 06:00 09:00
Night
Lunch Night
Description
Night
Start Time
Not Stored
17:00
17:00
:
:
12:00 15:00 18:00
Day Lunch Day
Condition
The current time service
mode (day/night/lunch)
and the switching mode
(automatic/manual) can
be switched manually by
an extension assigned
as the operator or
manager extension.
Lunch
Start Time End Time
Not Stored Not Stored
12:00 13:00
12:00 13:00
:
:
Tuesday
21:00 00:00
Night
:
: