Panasonic KX-TA824 Feature Manual page 140

1.1 General Features
Section Number
(7)
The following data can be controlled through system programming to adjust whether (or how) they are
printed or displayed by SMDR.
[Programmable Items]
Incoming/Outgoing outside
(CO) line call
Caller's identification
Secret Dialing
Account Code
System programming items Controls whether system programming items that have already been
140 Feature Manual
Data
Code
Item
Controls whether incoming/outgoing outside (CO) line calls are
shown (
If "Toll" is selected for outgoing outside (CO) line calls, only calls that
are checked in [302-305] TRS—COS 2-5 Denied Code and are
allowed, are shown.
Controls whether a caller's telephone number is shown (
Caller ID SMDR Format). When this is set to display telephone
numbers, even if the PBX receives a caller's name by the Caller ID
feature, only the telephone number is shown.
Controls whether secret dialing numbers stored in [001] System
Speed Dialing Number or stored in One-touch Dialing button are
shown by SMDR (
Controls whether the account code stored in [310] Account Code or
just the index of the account code is shown (
Code). The index of the account code is shown when "Verify-All" or
"Verify-Toll" is selected in [605] Account Code Mode.
assigned are shown based on the following parameters (
System Data Dump):
a)
b)
c)
d)
e)
f)
g)
Shows the account code appended to the call (
Account Code Entry), the account code index number (e.g.,
13), the number of the extension that used the Walking COS
feature (e.g., 101), or DISA security code status (e.g., 0).
0: A DISA incoming call without a DISA security code
1 to 4: A DISA incoming call with a DISA security code number
Actual DISA security codes are not printed by SMDR (
DISA Security Code).
Description
[802] Incoming/Outgoing Call Selection for Printing).
[803] Secret Number SMDR Print Suppression).
All para: All data
System para: All data except for "CO para", "Extn. para",
"DSS para" and "Speed dial"
CO para: The data assigned for each outside (CO) line
Extn. para: The data assigned for each extension
DSS para: The data assigned on the Direct Station
Selection (DSS) buttons and Programmable Feature (PF)
buttons on the DSS Console
Speed dial: The System Speed Dialing numbers and
names in [001] System Speed Dialing Number and [011]
System Speed Dialing Name
Stop output: Not shown
Description
[805] SMDR Account
1.1.2
[512]
[906]
[804]