Call Forwarding (Fwd)-To Outside (Co) Line - Panasonic KX-TA824 Feature Manual

[PC Programming]
9.2.1 Main [2-1]—FWD Selection
9.3.1 Line Mode [3-1]—Mode of incoming CO calls—Day, Night, Lunch
Feature Manual References
1.1.11 Call Forwarding (FWD)—All Calls
1.1.82 Message Waiting
Operating Manual References
1.3.12 Call Forwarding (FWD)—Follow Me
1.1.14 Call Forwarding (FWD)—To Outside (CO) Line
Description
All calls are forwarded to an outside party, provided this feature is enabled for each extension through
system programming (
Conditions
• This feature does not apply to calls from Hold Recall and Camp-on Recall.
• The types of calls that are forwarded by this feature are:
Outside (CO) line calls
Intercom calls
• A call can only be automatically forwarded one time.
A
Extn.
B
Extn.
• System programming determines the extensions that can forward all intercom calls and certain outside
(CO) line calls to an outside party (
must arrive on outside (CO) lines whose programming (
is one of the following:
a)
DIL
b)
DISA (only when the call is directly sent to an extension, not intercepted)
• Outside (CO) Line Call Duration
If a call between 2 outside parties is established, the call duration will be restricted by a system timer
( [205] CO-to-CO Line Call Duration). Both parties will hear a warning tone 15 seconds before the
timer expires. When the timer expires, the call is disconnected (
CO) Line Call Duration).
[607] Call Forwarding to CO Line).
Direct In Line (DIL), Direct Inward System Access (DISA)
Extension, Transfer
C
Outside party
[607] Call Forwarding to CO Line). These outside (CO) line calls
Call Type
[414-416] CO Line Mode—Day/Night/Lunch)
1.1.91 Outside-to-Outside (CO-to-
1.1 General Features
Feature Manual 27