Flash/Recall - Panasonic KX-TA824 Feature Manual

1.1 General Features

1.1.60 Flash/Recall

Description
A proprietary telephone (PT) user can use the FLASH/RECALL button to disconnect the current call and
start another call without hanging up. For example, if this button is used to disconnect an outside (CO) line,
the extension user will hear a new dial tone from the same outside (CO) line.
Conditions
• FLASH/RECALL Button Mode
One of the following modes can be selected through system programming (
Mode):
a)
MODE 1: EFA mode (
An EFA signal is sent for the specified duration (
b)
MODE 2: Flash/Recall mode
A flash/recall signal is sent when the FLASH/RECALL button is pressed if the length of time that
the button is pressed is longer than the specified duration (
length of time that the button is pressed is shorter than the specified duration, an EFA signal will
be sent for the specified duration.
• This feature functions only if the FLASH/RECALL button is set to "MODE 2: Flash/Recall mode".
• Disconnect Time
The amount of time between successive accesses to the same outside (CO) line is programmable for
each outside (CO) line (
• Pressing the FLASH/RECALL button restarts the conversation duration, outputs an SMDR call record
( 1.1.112 Station Message Detail Recording (SMDR)) and checks the Toll Restriction (TRS) class of
service (COS) number again. The notation "F/" will be logged along with the new dial number on SMDR.
Programming Manual References
[PT Programming]
[110] Flash/Recall Key Mode
[418] Flash/Recall Time
[422] Disconnect Time
[PC Programming]
9.1.11 Detail [1-10]—Proprietary Telephone—Flash/Recall Key Mode
9.3.3 Detail [3-3]—Flash/Recall Time, Disconnect Time
Feature Manual References
1.1.56 External Feature Access (EFA)
1.1.112 Station Message Detail Recording (SMDR)
Operating Manual References
1.3.46 Flash/Recall
86 Feature Manual
1.1.56 External Feature Access (EFA))
[422] Disconnect Time).
[110] Flash/Recall Key
[418] Flash/Recall Time).
[418] Flash/Recall Time). If the