Panasonic KX-TA824 Feature Manual page 66

1.1 General Features
Display Item
Duration of the current outside (CO) line
call
Conditions
• Multilingual Display
Each extension can select its display language through system programming (
Language). The selected language is shown on the display during operation and personal
programming, but not during system programming.
• Display Contrast
The display contrast can be adjusted with the Navigator key or the CONTRAST selector. This is
available only for PTs.
• Ringer Volume
The volume of the ringer can be adjusted with the RINGER Volume selector.
• Self-extension Number
A display PT user can confirm his or her own jack number and extension number on the display. Every
time the " " key is pressed, the display switches between "date (month, day) and time", "date (month,
day, year, day of the week)", and "extension number (and extension name if stored)".
• Date and Time Set
The current date and time are set through system programming (
manager service features. The time format shown on the display PTs while on-hook, "12 h" or "24 h",
can also be selected through system programming (
• Characters (name) or digits (number) exceeding the maximum length of the display are not displayed.
Although in this case information may not be displayed properly, the received information is not altered.
When the information displayed by pressing specific buttons (One-touch Dialing, REDIAL, Save) while
on-hook exceeds 17 characters, the "&" mark will be shown on the right side of the display.
Programming Manual References
[PT Programming]
[000] Date & Time
[009] Extension Number
[010] LCD Time Display
[204] Call Duration Counter Start
[604] Extension Name
[615] LCD Language
[904] Caller ID Log Priority
[PC Programming]
9.1.1 Date & Time [1-1]
9.1.2 Main [1-2]—Time—Time Display
9.1.3 Numbering Plan [1-3]
9.1.7 Timers [1-6]—Call Duration—Call Duration Counter Start Time
66 Feature Manual
Display Example
CO 1 0:01'15
[010] LCD Time Display).
Condition
The display remains for 5
seconds after the call is finished.
The outgoing outside (CO) line
call duration starts when the
specified time expires (
Call Duration Counter Start). The
display does not show the
duration of intercom calls.
[615] LCD
[000] Date & Time) or the operator/
[204]