Resetting The Device; Figure 4-6 Ip And Firmware Settings: Device Information Tab - Honeywell EQUIP HD3MDIHX User Manual

IP Camera Web-Client

Resetting the Device

50
Figure 4-6 IP and Firmware Settings: Device Information Tab
Device Name as entered in the
IP Utility program
IP Address on the network
(DHCP/Static/APIPA)
Subnet Mask and Default Gateway
address that connects the camera to
the network
MAC Address is a factory assigned
address unique for each device
Firmware Settings including
product name and version
Video Format - NTSC or PAL
You can choose from Restart, Restore, and Reset to Defaults. See
these functions take approximately 2 minutes to complete, and during that time, the camera
will lose connection to the Web-Client. You will be asked if you wish to proceed before the
action occurs.
Restart Restarts the camera while maintaining the existing configurations.
Restore Resets the camera to the factory defaults, except the network settings.
Reset to Resets to the camera's factory defaults.
Defaults
Figure 4-6. Each of