Adjusting The Lens Focus; Securing The Enclosure Cover; Figure 2-9 Installing The Enclosure Cover - Honeywell EQUIP HD3MDIHX User Manual

HD3MDIH/X EQUIP Series Indoor High Resolution True Day/Night IP Dome Camera User Guide

Adjusting the Lens Focus

TECH TIP!

Securing the Enclosure Cover

Document 800-07361 Rev A
12/10
Lenses are pre-focused at the factory. They might require a final adjustment after
installation because the optical effect of the dome bubble might cause a slight defocusing
of the lens.
To check the focus, hold the dome bubble over the lens while making any adjustments.
To adjust the camera direction, view angle, and focus, connect the local video out to the
video monitor using the supplied BNC video cable.
Install the dome bubble when you have set up your camera and completed the network
connections (see Chapter 3, Installing the Honeywell IP Utility and Web-Client
Place the enclosure cover on the camera with the tabs to the left of the slots, then turn it
clockwise until the tabs click securely into place.
Figure 2-9 Installing the Enclosure Cover
Software).
27