Setting The Time And Date - Trane BCU Operator Display Operations

Operator Display Setup Options
52

Setting the Time and Date

You can set the time and date for the BCU operator display using the
time and date function. The time and date are displayed on the home
screen.
To set the time:
1. From the home screen press the Setup button. The Setup menu dis-
plays (see Figure 42 on page 51).
2. Press the Set Time button. The Set System Time screen displays (see
Figure 43).
Figure 43: Set System Time Screen
3. Enter the new time by pressing the numbers on the keypad. If you
need to clear your entry, press the Clear button,
Note:
The default selection for the time of day is AM. You need to
press the PM button to change the time to a PM setting.
4. Press OK. A confirmation screen displays.
5. Press Yes to confirm your changes and return to the Setup menu. The
new time is displayed on the Set Time button.
BMTW-SVU02C-EN