Wireless Mac Filtering - TP-Link TL-WDR3600 User Manual

Type - you can choose the type for the WEP security on the drop-down list. The default
•
setting is Automatic, which can select Shared Key or Open System authentication
type automatically based on the wireless station's capability and request.
WEP Key Format - Hexadecimal and ASCII formats are provided here
•
format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified
length. ASCII format stands for any combination of keyboard characters in the specified
length.
WEP Key - Select which of the four keys will be used and enter the matching WEP key
•
that you create. Make sure these values are identical on all wireless stations in your
network.
Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for
•
encryption. "Disabled" means this WEP key entry is invalid.
64-bit - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key
is not promoted) or 5 ASCII characters.
128-bit - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key
is not promoted) or 13 ASCII characters.
152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key
is not promoted) or 16 ASCII characters.

Note:
If you do not set the key, the wireless security function is still disabled even if you have
selected Shared Key as Authentication Type.
Be sure to click the Save button to save your settings on this page.
4.7.4

Wireless MAC Filtering

Choose menu "Wireless → MAC Filtering", you can control the wireless access by configuring
the Wireless MAC Filtering function, shown in Figure 4-24.
TL-WDR3600 N600 Wireless Dual Band Gigabit Router
Figure 4-38 WEP
- 53 -
.
Hexadecimal